Free measure & quote · Berwick · Cranbourne · Narre Warren · Call (03) 9003 0108
Aluminium, timber, double-glazed — measured + installed

Window replacement prices in Berwick — 2026 guide

Window replacement in Berwick ranges from $580 (small bedroom window, aluminium, single-glazed) to $3,800+ (large double-glazed timber sash) per window. Whole-home replacement typically lands $18,000–$45,000 depending on number of openings, frame material, and glazing.

Below are realistic 2026 per-window fitted rates. We measure on-site, manufacture in Berwick, install + dispose of old. Call (03) 9003 0108 for an exact quote.

Typical 2026 prices for window replacement in Berwick

Real ranges from our books, not made-up averages. Every quote we issue is itemised against the work below.

ServiceTypical range (AU 2026)What's included
Standard aluminium window (small, single-glazed) $580 – $1,200 Bedroom-size, awning or sliding.
Standard aluminium window (medium) $1,200 – $1,800 Living-room awning or sliding.
Standard aluminium window (large) $1,800 – $2,800 Large opening, multi-panel.
Double-glazed aluminium (small) $880 – $1,500 20-30% premium over single.
Double-glazed aluminium (medium) $1,600 – $2,400
Double-glazed aluminium (large) $2,400 – $3,800
Timber sash window (small, period-matched) $1,200 – $2,400 Heritage homes.
Timber sash window (medium) $2,400 – $3,800
UPVC double-glazed (small) $1,200 – $2,000 Best thermal performance per dollar.
UPVC double-glazed (medium) $1,800 – $3,000
Sliding door (2-panel, std width) $1,800 – $3,500 2.4m height, double-glazed.
Sliding door (3-panel, wide opening) $3,500 – $6,500 Large opening, double-glazed.
Bifold door (3-panel) $5,500 – $9,500 Premium opening.
Bifold door (4-6 panel) $9,500 – $18,500 Maximum opening.
Window measure + quote Free Site visit, written quote within 5 days.
Old window removal + disposal Included Standard inclusion.
Window reveal / architrave make-good $180 – $480 per window Patching after removal.
Energy rating compliance assessment $280 – $580 BCA / BASIX / NatHERS reporting.

Prices indicative for Berwick in 2026. Final quote depends on your site — call (03) 9003 0108 for an exact number.

Need an exact price for your job?

Most quotes ready within 24 hours of the site visit. No-obligation, free, written.

What changes the price on your job

The ranges above are the starting point. These five factors are what move a quote up or down within (or sometimes outside) those bands.

  1. Frame material — aluminium cheapest, timber premium, UPVC mid (best insulation).
  2. Single vs double glazing — double adds 20-30% but cuts thermal loss 60%.
  3. Window size + style — awning + sliding cheaper than custom shapes (round, arched).
  4. Heritage requirements — heritage zones often require timber sash + period-correct glazing.
  5. Volume — whole-home (10+ openings) gets 15-25% off per-window rate.

Red flags — what to watch for in quotes

We see these patterns every week from operators we'd never recommend. If a quote you've received contains one of these, ask before signing.

  • Quotes without removal + disposal — surprise $800+ at end of job.
  • Cheap-end aluminium without thermal break — same as no insulation. Avoid sub-$500 per window.
  • No energy rating on whole-home replacements — BASIX/BCA non-compliant.
  • Frameless / frameless-look quotes that turn out to be wide-frame — see a sample before deposit.
  • Bifold quotes without floor-track waterproofing — leaks within 2 years.

How to get an accurate quote in 5 minutes

Have the following ready when you call (03) 9003 0108 (or jot it on the quote form) and we can give you a real number in one call, not five.

  1. Number of windows + rough sizes.
  2. Style preference (awning / sliding / casement / sash).
  3. Glazing preference (single / double / acoustic).
  4. Frame material preference.
  5. Heritage / planning zone restrictions.

Frequently asked questions

How long does install take?
Single window: 1-2 hours. Whole home (8-12 openings): 2-4 days. Plus 4-6 weeks lead-time for manufacture.
Single or double glazing?
Double — almost always worth it. 30-50% reduction in heating/cooling loss, condensation reduction, noise reduction.
Aluminium or UPVC or timber?
UPVC: best thermal + acoustic per dollar; modern look. Aluminium: most popular, slim profile. Timber: heritage homes, premium look + cost.
Do you measure on site?
Yes — free measure + quote within 5 days. We don't price off photos for installation.
Heritage homes — what's allowed?
Most heritage overlays require timber sash + period-correct profile. We have heritage-grade joinery and handle the permit.
Can you do one window at a time?
Yes — but mobilisation cost makes whole-of-home cheaper per window.
Warranty?
Frame: 10-year manufacturer. Glass: 5-year insulated glass unit warranty. Workmanship: 7 years.

Ready for an exact quote on your Berwick job?

Free written quotes. No obligation. Same-day callbacks on most enquiries.

Call (03) 9003 0108